Galvanic isolated Serial Port Converter
| PRODUCT TYPE | Galvanic isolated TTL To RS232 converter | |
|---|---|---|
| POWER SUPPLY INTERFACE | Power supply | 3.3V ~ 5V |
| Protection | over-voltage, reverse-proof | |
| DEVICE PORT | TTL/RS232 standard compatible | |
| TTL | Connector | screw terminal |
| Transmission distance | about 10m | |
| Transmission mode | point-to-point | |
| RS232 | Connector | screw terminal |
| Protection | TVS diode, surge protection & ESD protection, power isolation and signal isolation | |
| Transmission distance | About 15m | |
| Transmission mode | Point-to-point | |
| INDICATORS | PWR | Red power indicator, lights up when there is power supply connection and voltage is detected |
| TXD | TX indicator, lights up when the TTL port sends data | |
| RXD | RX indicator, lights up when the TTL port receives data | |
| APPEARANCE | Case | Rail-mount ABS case, suitable for 35mm DIN rail |
| Dimensions | 91.6 × 58.7 × 23.3mm | |
For Converting The TTL Signal Into RS232 Signal And
Expanding Communication Distance
Easy To Combine Multi Rail-Mounted Serial Server Together, More Freely
Onboard power and signal isolation, provide stable isolated voltage, high reliability and strong anti-interference. Onboard ESD protection and TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic. Onboard protection diodes, ensure the current/voltage stable outputs, provide over-current/over-voltage protection, improve shock proof performance
| TOP SIDE SCREW TERMINAL | BOTTOM SIDE SCREW TERMINAL | ||
|---|---|---|---|
| VCC | Power Input DC 3.3V~5V power supply | SGND | RS232 signal ground |
| GND | Ground / TTL signal ground | ||
| TXD | TTL transmit data pin | TXD | RS232 transmit data pin |
| RXD | TTL receive data pin | RXD | RS232 receive data pin |
TTL convert to RS232, point-to-point, full-duplex communication, suitable for interface conversion
Two groups TTL To RS232 conversion, point-to-point, full-duplex communication, suitable for extending the communication distance of TTL
The TTL To RS232 (B) can be widely used for point-to-point communication network between two hosts, or between host and MCU/Peripheral. It also can be used in application scenarios that require TTL To RS232 conversion such as Industrial Automation and IoT.
| Specifikacija nije definisana |
Komentari